Spiral Wound Gaskets

Spiral wound sealing element.
• Solid metal outer ring used as centering device & compression stop.
• Used mainly on raised face & flat face flanges.
• General duties.

Spiral wound sealing element.
• Solid metal inner ring.
• High pressure temperature
capability.
• Male to female flanges.
• General & critical duties.

Spiral wound sealing element.
• Solid metal inner & outer ring.
• Suitable for high pressure &
temperature applications.
• Prevents turbulence & erosion
damage to flanges.
• Prevents damage to the
gasket bore & inner windings.
• Acts as a heat shield & a
corrosion barrier.
• General & critical duties.

Spiral wound sealing element.
• Solid PTFE inner ring solid metal outer ring.
• Raised face & flat face
flanges.
• Acts as a secondary seal.
• Environmentally friendly.
• Corrosion barrier

Spiral wound sealing element.
• Solid metal graflex covered
inner.
• Suitable for high pressure & temperature applications.
• Raised face & flat face
flanges.
• Corrosive media.
• Acts as a secondary seal.

• Spiral wound sealing element.
Wound high density.
• Wide choice of materials for
filler & metal strip.
• High pressure pumps.
• High pressure valves (Gas
services).
• Gas service.
• Low emission tested.

• Spiral wound sealing element.
• Covered with 0.5mm graflex.
• Used to manhole covers.
• Low bolt load applications.
• Uneven sealing faces.
• Double integrity seal.

For heat exchange applications.
• Spiral wound sealing element.
• A combination of inner & outer rings.
• The inner ring could have pass bars or could
carry either a metal clad or soft gasket
with pass bars.
• Manufactured to customer design.